Elevator wani nau'in kayan aikin injiniya ne, a cikin amfani da lokaci a cikin tsari babu makawa zai bayyana wasu kurakurai da ƙananan kurakurai, don haka a cikin yanayin kwatsam yaya za a magance shi? Mai ƙera lif ɗin da ke gaba Pack King Automatic Boats Co., Ltd. don yawancin masu amfani da lif ɗin sun taƙaita wasu hanyoyin warware matsala na yau da kullun don haɓakawa, don tunani.
Dangane da shekaru da yawa na samar da ɗagawa da gogewar tallace-tallace, haɗe tare da amsawar mai amfani, matsalolin ɗagawa yayin aiwatar da amfani sun kasu kashi uku: toshewar gaske, dawowar da ya wuce kima da sauti mara kyau a cikin kayan aiki.
Laifi na 1: Toshewar tana da mahimmanci
Akwai dalilai guda biyar da yasa clogging zai iya faruwa:
1, elevator ba ya fara ciyarwa ko tashar jiragen ruwa ba daidaituwa ba ce;
2, matsalar hopper belt skid matsala;
3, abincin shiga yana da yawa;
4. An shigar da babba ko fibrous al'amarin cikin akwatin;
5. Tashar fitarwa ba ta da matsala.
Don dalilai guda biyar na sama, madaidaitan mafita da muka bayar sune kamar haka:
1, fara injin bayan aiki mara nauyi na wani lokaci, sannan a bar tashar tashar abinci ta ciyar, kuma dole ne ta sarrafa kayan tashar abincin cikin sauri, tuna cewa adadin abincin ya yi yawa ko ya yi ƙanƙanta, ƙarami yana da sauƙin toshe, ba zai iya kaiwa ga ƙaddarar da aka ƙaddara ba.
2, saboda bel ɗin ya yi ƙanƙara, to za ku iya ta da bel ɗin ta hanyar ƙarar na'urar, idan bel ɗin ya yi yawa, kuna buƙatar yanke bel ɗin.
3. Mai kama da shari'ar farko, adadin abincin kawai ake buƙatar sarrafawa don cimma manufar.
4, ta hanyar ƙofar shiga kusa da tushe don tsabtace tushe ko akwati na fibrous, babban toshe da sauran ƙasashen waje.
5. Dredge mashiga.
Laifi na biyu: kayan dawowa mai yawa
Wadannan dalilai uku masu zuwa zasu haifar da gazawar kayan dawowa mai yawa:
1. Saurin layi na ɓangaren traction yana da sauri, yana haifar da isasshen fitarwa;
2. Tazara tsakanin hopper da tashar fitarwa ta yi yawa;
3. Tashar fitarwa ba ta da matsala.
Don dalilai uku da ke sama, xinxiang Dayong yana ba da mafita kamar haka:
1, daidaita saurin motar.
2, daidaita nisa tsakanin tashar kayan abu da tashar fitarwa.
3. Gyara bakin ciyarwa ko bututun ciyarwa.
Laifi na uku: sauti mara kyau a cikin kayan aiki
Akwai dalilai guda hudu, bi da bi:
1. Kullin hopper ko ƙullen U-dimbin yawa yana sassautawa, ko hopper, ƙulle-ƙulle ko saɓon U-dimbin yawa;
2, kayan da aka haɗe da ƙarfe da sauran abubuwa a cikin ɗagawa;
3. Tazarar da ke tsakanin ɓangaren traction (da suka haɗa da bel, sarƙa, sarƙar faranti, da dai sauransu) da jikin akwatin ya yi ƙanƙanta, kuma haɗarin ya auku;
4, abubuwan jan hankali (gami da bel, sarkar, sarkar faranti, da sauransu) saboda amfani da dogon lokaci, wanda ke haifar da sako -sako ko gudu daga matsalar, ta yadda hopper da karowar jikin akwatin.
Daidaitattun mafita sune kamar haka:
1. Buɗe ƙofar shiga a gefen tushe, ƙulla ƙulle-ƙulle, da dunƙule hopper, ƙulle da U-ƙulle. Idan hopper da U-buckle sun lalace, yakamata a maye gurbin su cikin lokaci.
2. Buɗe tashar shiga don tsabtace ƙarfe da sauran abubuwan shiga jikin akwatin.
3. Bude lif murfin kai daga lif dandalin dubawa da gyarawa da daidaita matsayi tsakanin hopper da tashar fitarwa.
4. Daidaita na’urar taunawa don sanya tashin hankali na na’urar gogayya ta zama matsakaici. Idan na’urar gogewar ta yi sako -sako, fiye da yadda ake daidaita kayan aikin tashin hankali, ya zama dole a yanke yadda ya dace.
A sama masu ƙera lif ɗin xinxiang suna da taimako don kawo mana ɗigon guga da ake amfani da shi wajen aiwatar da lahani na gama gari da kuma warware matsalar, yana da kyau a lura cewa hanyoyin warware matsalar da ke sama a sama duk suna cikin yanayin ɗagawa lokacin jinkiri na injin, don haka, lokacin da mai aiki a cikin hanyar tantancewa ko magance matsalar, dole ne ya bar ɗagawa ya daina aiki, Sannan za mu iya farautar.
Lokacin aikawa: Oct-05-2019